Full set of Drive Shaft Bolts for AP2
 
Front and Rear Bolts for 2004 to 2009
 
These are an upgrade over the Factory bolts
 
The factory Bolts are often difficult to remove and usually the head strips out
 
The LHT Bolts are not only stronger, the socket head a slightly deeper and much less 
chance of your Hex tool slipping.
 
The Drive Shaft Bolts for AP2 S2000 are soft and easy to damage when trying to remove them, The shallow depth doesn't allow deep contact with an 8mm Allen tool .
 
We never re use the factory bolts on the 2004 to 2009 S2000s
 
Many times the factory bolts have to be cut out to remove them.
 
These reuseable and are stronger than the OEM bolts.
 
 
The LHT Kit Includes 12 bolts- Replace bolts front and back
6 Bolts , Drive shaft to transmission
6  Bolts -Driveshaft to differential 
 
 
 
 
These are hardened ( 12.9 High strength ) replacement drive shaft bolts for the front and rear 
of the drive shaft.
They have a deeper 8mm Socket Hex to get good contact , This makes it easier and safer to service the transmission, drive shaft or differential and can be re used many times.
 
* Keep in mind one set is enough for one car *
 
Order only 1 set.